Seat Belts - Polaris RANGER RZR Owner's Manual

FEATURES AND CONTROLS

Seat Belts

This Polaris vehicle is equipped with three-point lap and diagonal seat
belts for the operator and passenger. Always make sure the seat belts are
secured for both the operator and passenger before riding.
To wear the seat belt properly, follow this procedure:
1. Pull the seat belt latch down-
ward and across your chest
toward the buckle at the inner
edge of the seat. The belt should
fit snugly across your hips and
diagonally across your chest.
Make sure the belt is not twisted.
2. Push the latch plate into the
buckle until it clicks.
3. Release the strap, it will self-
tighten.
4. Press the red release latch on the
buckle to release the seat belt.
34
Seat Belt
Latches
Seat Belt
Buckles