IBM MT 2366 Hardware Maintenance Manual page 88

Removing and replacing a FRU
3. Peel the cover sheet (rectangle) 3 in the direction of
arrow b . Do not pull the cover sheet (rectangle)
upward ( a ) to avoid the thermal rubber comes off
with the sheet.
If some part of the thermal rubber came off with the
cover sheet, stick the cover sheet on the fan assembly
again aligning the cracked position. Then rub over the
cover sheet with your finger well and remove the sheet
again.
84
ThinkPad T30 (MT 2366, 2367)
4
a b