Fn Key Combinations - IBM MT 2366 Hardware Maintenance Manual

Thinkpad t30, thinkpad dock
Hide thumbs Also See for MT 2366:
Table of Contents

Advertisement

Fn key combinations

The following table shows the function of each combination
of Fn with a function key.
Key
combination
Fn+F1
Fn+F2
Fn+F3
Fn+F4
Fn+F5
Fn+F6
Fn+F7
Fn+F8
Fn+F9
Fn+F10
Fn+F11
Fn+F12
Fn+PgUp
Fn+Home
Fn+End
Fn+Spacebar
Description
Reserved.
Reserved.
Turn off the LCD display, leaving the screen
blank. To turn the LCD display on again, press
any key or the TrackPoint stick.
Put the computer in standby mode. To return to
normal operation, press the Fn key
independently, without pressing a function key.
Note: In Windows 2000 and Windows XP, this
combination of buttons functions as a sleep
button. The setting can be changed so that
pressing it puts the computer into hibernation
mode or even shuts the computer down.
Reserved.
Reserved.
Switch between the computer display and an
external monitor (CRT). If an external monitor is
attached, computer output is displayed in the
following three patterns by turns:
v CRT display
v Computer display + CRT display
v Computer display
Switch the computer screen size between
expanded and normal mode if the computer
display image is smaller than the physical
display.
Note: This function is not supported in
Windows 2000 and Windows XP.
Reserved.
Reserved.
Reserved.
Put the computer into hibernation mode. To
return to normal operation, press the power
button for less than four seconds.
Note: In Windows 2000 and Windows XP, you
can use Fn+F12 for hibernation only if the IBM
PM device driver has been installed on the
computer.
Turn the ThinkLight on or off.
The computer display becomes brighter.
The computer display becomes less bright.
Enable the FullScreen Magnifier function.
Product overview
ThinkPad T30
49

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mt 2631

Table of Contents