Removing and replacing a FRU
1150 PC Card slot assembly
For access, remove these FRUs, in order:
v "1010 Battery pack" on page 61
v "1020 Ultrabay Plus device" on page 62
v "1030 Hard-disk drive" on page 63
v "1050 Backup battery" on page 67
v "1060 DIMM" on page 69
v "1090 Keyboard" on page 77
v "1120 Keyboard bezel" on page 87
1
Step
Screw (quantity)
1
M2 × 16 mm, nylon-coated (4)
When installing: Make sure that the connector of the PC
100
ThinkPad T30 (MT 2366, 2367)
1
2
card slot is firmly attached, and then
secure the screws.
Torque
0.245 Nm
(2.5 kgfcm)