Download Print this page

Smeg SHW1235X Quick Start Manual

120cm wallmount rangehood
Hide thumbs Also See for SHW1235X:

Advertisement

SHW1235X
EAN
9345025000804
finish
stainless steel
dimensions
1198mmW x 540–900mmH x 470mmD
installation
wallmount
motor
1 x 260W
air extraction • duct direct to atmosphere — 150mm
diameter ducting required
• recirculate to kitchen — 125mm ducting
required
capacity
760m³/hr (IEC 61591: p=0)
710m³/hr (IEC 61591: p=1)
noise rating
40–64 dBA (IEC 60704-3)
illumination
3 X LED 4W
speeds
four, touch control + intensive*
maximum
0.03 amps
current
power supply 220–240V, 50Hz
filter prompt
30-hour stainless steel filter cleaning prompt
120-hour charcoal filter replacement prompt
supplied
4 x aluminium grease filters
optional
charcoal filter kit, part # KITFC161
weight
26kg gross, 20kg net
package
470 x 1272 x 603
dimensions
smeg 120cm wallmount rangehood
3
LED
LIGHT
SilK
the Silence Key
p = 0
airflow direct out of motor housing
p = 1
airflow after 1m & 90° bend + 1m
*INTENSIVE: the Intensive Speed function activates
maximum air extraction for 10 minutes to meet the
needs of heavy-duty cooking, such as stir-fry.
3-PHASE: Greater efficiency,
reduced energy consumption
(up to 50%) and reduced noise
due to improved electrical
balance.
LEDlight: For a pleasant diffused
lighting with just 3W energy
consumption
Sil-K-Sm, the Silence Key:
reduces rangehood sound
emissions by 6 dBA.
low
medium
high
ID151012
Code SHW1235X

Advertisement

loading

Summary of Contents for Smeg SHW1235X

  • Page 1 SHW1235X smeg 120cm wallmount rangehood 3-PHASE: Greater efficiency, reduced energy consumption (up to 50%) and reduced noise due to improved electrical balance. LEDlight: For a pleasant diffused lighting with just 3W energy LIGHT consumption Sil-K-Sm, the Silence Key: SilK reduces rangehood sound emissions by 6 dBA.
  • Page 2 SHW1235X smeg 90cm wallmount rangehood 650mm minimum PLEASE NOTE: drawings are not to scale. They are to assist only. WARNING: technical specifications and product sizes can be varied by the manufacturer ID151012 without notice. Cutouts for appliances should only be by physical product measurements.