Prepare The Digital Camera; Prepare The Connecting Accessories - Sea&Sea MDX-RX100/? Instruction Manual

Preparation for Setting Up
Maintaining the O-ring
This product is kept watertight by the O-ring.
To keep the O-ring functioning properly,
please observe the following before setting up.
Make sure to remove the O-ring when maintaining.
For detailed O-ring maintenance methods,
please see the O-ring maintenance manual.
CAUTION
Make sure to fit/install the O-ring into the groove properly after maintenance.

Prepare the digital camera

This product is exclusively designed for use with Sony
DSC-RX100/DSC-RX100M2 digital camera. Other cameras are not
compatible with this product.
Make sure that there is sufficient battery power remaining and the image
storage medium has enough room for the number of pictures.
Remove the strap from the camera if any of these accessories are
attached.
Make sure the camera is operating correctly, referring to the camera's
instruction manual for details.

Prepare the connecting accessories

When using external strobes, lights or other accessories in combination
with this product, prepare the equipment before setting up.
If the accessories are kept watertight by O-rings, make sure the O-rings
are properly maintained.
If the accessories are powered by batteries, make sure that there is
sufficient battery power remaining.
Make sure the equipment is operating correctly, referring to the instruction
manual provided with the equipment.
O-ring
E-8