Care Of Your Steam Mop - Shark S3550 Owner's Manual

Care of Your Steam Mop

AFTER USE AND STORAGE
1
When you have finished using the
steam mop, and your floors are clean,
unplug the cord from the outlet and
move it into an upright position. Let
the unit cool 2-3 minutes and release
steam by pumping the handle several
times before removing the micro-
fiber cleaning pocket from the mop
head.
1
2
Remove the micro-fiber cleaning
pocket by releasing the quick
fasteners and using the lavender
loop on the side of the pocket,
avoiding contact with the hot pocket
or dirt. Then empty the water tank.
IMPORTANT: Be very careful
because the cleaning pockets can
get very hot from the steam, so use
caution when removing them. Let
the unit cool 2-3 minutes.
8 TOLL FREE: 1-800-798-7398
2
3
3
To store the Shark
hanging up; first remove the head
(after it has cooled and the steam
has been released) then hang on a
large hook.
NOTE: If you want to store it
standing upright then make sure
it's leaning against a wall for added
support and safety. Always store
your Steam Mop with the micro-fiber
pocket removed, away from children
or high traffic areas.
Steam Mop
®