Auto Tv Off; Store Mode; Media Renderer; Power Up Mode - Toshiba 48L344 DG Online Manual

Auto TV Off

You can set the timeout value of auto off feature. After
the timeout value is reached and the TV is not operated
for selected time, the TV will go off. Press MENU button
and select Settings by using Left or Right button. Press
OK button to continue. Use Up or Down button to select
Other Settings and then press OK button. Select Auto
TV Off using Up or Down button.

Store Mode

If you set Store Mode to Enabled, your TV's
features will be illustrated on the top of the screen. To
deactivate this feature, set to Disabled.

MEDIA Renderer

This feature allows to share/play files stored in a
compatible smartphone, tablet pc or laptop on
MEDIA
the TV. Install an appropriate software on your device
and read instructions of the sharing software for more
information. Highlight
MEDIA
Left or Right button to enable or disable.

Power Up Mode

This setting configures the power up mode preference.
Standby: The TV always powers up in Standby mode.
Last State: The TV always switches on with the last
selected channel/source.

Bisskey

Biss is a satellite signal scrambling system that is
used for some broadcasts. If you need to enter BISS
key on a broadcast, you can use Biss Key setting.
Highlight Biss Key and press OK to enter keys on the
desired broadcast.
Other Controls -
Renderer and press
English - 33 -
continued
This function allows to control the connected HDMI-
CEC compatible devices with the remote control of
the TV.
Select the HDMI input of the connected device from
the source menu. The TV remote is automatically
able to control most functions of the device (navigate
menus, change channels, launch the disc etc.).
To disable this feature hold the "0-Zero" button on
the remote control for 3 seconds. It is also possible
to disable this feature in the configuration menu of
the connected HDMI device. Refer to the operating
instructions of the related device.
Press Left or Right button to enable or disable the
feature.
CEC operation is available if a CEC device is present.
The CEC osd menu is accessed through the "QUICK"
button on the remote. The CEC osd menu will only be
displayed if a CEC product is connected.

CEC Auto Power On

This function allows the connected HDMI-CEC
compatible device to turn on the TV and switch to its
input source automatically.
Press Left or Right button to enable or disable the
feature.

CEC