Installing The Lcd Bezel - Toshiba Satellite Maintenance Manual

Installing the LCD Bezel

Install the LCD bezel according to the following procedures.
1. Place the LCD bezel on the LCD cover assembly. Make sure the hinge caps fit over the
LCD hinges and the tabs on the back of the LCD bezel align with the slots in the LCD
cover assembly.
2. Press down on the LCD bezel, starting from the bottom edge and toward the sides and top
edge. Make sure the bezel clicks into place.
3. Secure the LCD bezel to the LCD cover assembly with two M2x6 screws.
4. Adhere the two screw rubbers to the screws.
Satellite/Satellite PRO T230D Maintenance Manual
4 Replacement Procedures
4-51