Figure 4.13 Removing The Logic Upper Assembly; Installing The Logic Upper Assembly - Toshiba Satellite Maintenance Manual

3. Pry up the logic upper assembly from its top and remove it from the logic lower assembly.

Installing the Logic Upper Assembly

Install the logic upper assembly according to the following procedures.
1. Seat the logic upper assembly to the front of the laptop, and adjust to the correct position.
2. Press down the logic upper assembly, starting from the top edge and toward the bottom
edge. Make sure that the hooks on the back of the assembly are securely in place.
3. Connect the two FFC and secure four M2x3 and one M2x6 screws as indicated in Figure
4.12.
4. Turn the laptop upside down and secure it with nine M2x6 screws as indicated in Figure
4.11.
Satellite/Satellite PRO T230D Maintenance Manual

Figure 4.13 Removing the logic upper assembly

4 Replacement Procedures
4-21