Chrysler Town & Country 2011 Owner's Manual page 510

508 MAINTAINING YOUR VEHICLE
CAUTION!
• When installing the Totally Integrated Power
Module cover, it is important to ensure the cover is
properly positioned and fully latched. Failure to
do so may allow water to get into the Integrated
Power Module, and possibly result in a electrical
system failure.
• When replacing a blown fuse, it is important to
use only a fuse having the correct amperage rating.
The use of a fuse with a rating other than indicated
may result in a dangerous electrical system over-
load. If a properly rated fuse continues to blow, it
indicates a problem in the circuit that must be
corrected.
The numbers inside the TIPM cover correspond to the
following table.
Cartridge Mini-
Cavity
Fuse Fuse
J1 40 Amp
Green
J2 30 Amp
Pink
J3 30 Amp
Pink
J4 25 Amp
Natural
J5 25 Amp
Natural
J6 40 Amp
Green
J7 30 Amp
Pink
Description
— Power Folding Seat
— Power Liftgate Mod-
ule
— Rear Door Module
(RR Door Node)
— Driver Door Node
— Passenger Door Node
— Antilock Brakes
Pump/Stability Con-
trol System
— Antilock Brakes
Valve/Stability Con-
trol System