Husqvarna 968999216 Operator's Manual page 46

9. Steering Control Shafts
Tip the driver's seat.
Lubricate with a grease gun, one zerk for
each steering control shaft, until the grease is
forced out.
Use only good quality lithium based grease.
Grease from well-known brand names
(petrochemical companies, etc.) usually
maintains a good quality.
10. Mower Deck Struts
Lubricate with a grease gun, one zerk for
each strut, until the grease is forced out.
Use only good quality lithium based grease.
Grease from well-known brand names
(petrochemical companies, etc.) usually
maintains a good quality.
11. Belt Adjuster - Mule Drive Idler Arm
Lubricate with a grease gun, one zerk, until
the grease is forced out.
Use only good quality molybdenum
disulphide grease.
Grease from well-known brand names
(petrochemical companies, etc.) usually
maintains a good quality
IMPORTANT INFORMATION
Be spartan and remove excess lubricant so
that is does not come into contact with
belts or belt pulley drive surfaces.
44
LUBRICATION
Lubricating the steering control shafts
Lubricating struts
Lubricating mule drive idler arm
8011-578-2
8011-577