Horizon Fitness T100 Owner's Manual page 9

ASSEMBLY STEP 4
ARC WASHERS (H)
SCREWS (G)
CONSOLE CABLE
UPRIGHT MAST
CONSOLE
HAND GRIP POST
CONSOLE
CONSOLE CABLE
COVER
HARDWARE BAG 4 CONTENTS :
SCREW (G)
10 mm
Qty: 4
Open HARDWARE BAG 4.
A
Slide the CONSOLE onto the HAND GRIP POSTS.
B
Attach the HAND GRIP POSTS to the CONSOLE
C
using 4 SCREWS (G) and 4 ARC WASHERS (H)
from the below the CONSOLE.
NOTE: Be careful not to pinch any wires
while attaching the console.
Connect the CONSOLE CABLES and carefully tuck
D
wires in mast to avoid damage. Note: do not pinch
console cable. Be sure the console cable prongs
are aligned and the ends are tightly seated into each
other.
Attach CONSOLE CABLE COVER.
E
Go back and completely tighten all bolts and screws
F
from STEPS 1-4.
ARC WASHER (H)
12 mm
Qty: 4
9