Horizon Fitness T100 Owner's Manual page 11

ASSEMBLY STEP 6
HARDWARE BAG 6 CONTENTS :
SCREW (J)
12 mm
Qty: 4
SCREWS (J) END CAP
Open HARDWARE BAG 6.
A
NOTE: lock latch must be securely engaged
before proceeding with assembly. (See page
folding instructions in TREADMILL GUIDE.)
Attach the right END CAP using 2 SCREWS
B
(J). Repeat on the other side.
Connect power cord to a power outlet. The
C
ON/OFF switch is located next to the power
cord. Flip this switch to the 'ON' position. You
will hear a beep and the console will turn on.
Before the first use, lubricate the treadmill
D
deck by following the instructions in the
MAINTENANCE section in the TREADMILL
GUIDE.
YOU ARE FINISHED!
11