Omron BU2002RWL Instruction Manual page 44

Menu
Settings Local Settings
In/Out Settings
Boot Settings
Batt. Settings
Settings Dry Contact
Identification Type
Serial Number
Firmware Ver.
Memorandum
2002
BU
Language Set the language to be displayed on
the LCD.
LCD Setting Change the contrast of the LCD.
LCD Auto off Set the amount of time after which the
LCD turns off automatically.
LCD Test Check that the LCD and LEDs light up.
Audible alarm Set the beeper status.
Calendar Set the calendar information for the
UPS.
UPS Inst. Date Set the date you started using the UPS.
UPS life count Set the UPS life counter status.
Menu Type Select the menu to be displayed.
"Standard" displays frequently used
items only.
Output Voltage Set the output voltage.
Frequency Range Switch the frequency range mode.
Auto reboot Set auto restart from power failure.
Delay time Set the delay time for recovery from
power failure.
Battery level Set the battery voltage for restarting the
UPS.
Reboot Mode Set the mode for rebooting.
Power SW off Switch the operating mode of the power
switch.
Function Test Set the timing at which to execute the
self-diagnostic test.
Bat.L.Counter Set whether to be notified of the battery
life.
Bat.Inst.Date Set the date you replaced the battery.
Max.BackUpTime Set the output of the UPS to stop after
a specified amount of time.
Low Battery Set the level at which to detect low
battery.
BS Valid Range Set the status for receiving the BS
signal.
BS Delay Time Set the delay time for the BS signal.
BU Delay Time Set the delay time for the BU signal.
DryCont. Logic Set the logic of each contact signal.
Remote Logic Set the logic of the remote signal.
Display the names of the UPS and
battery pack.
Display the serial number of the UPS.
Display the firmware version of the
UPS.
You can record information of 20
alphanumeric characters.
3002
RWL/BU RWL/BU
Description
5002
RWL
Note
*2
*1
*1
*1
*1
*1
4
*1
*1
*1
*1
*2
*1
*1
*1
*1
*1
32