Taillamps, Turn Signal, Stoplamps And Back-Up Lamps - Chevrolet Silverado 2007 Owner's Manual

Taillamps, Turn Signal, Stoplamps
and Back-up Lamps
To replace one of these bulbs:
1. Open the tailgate. Tailgate on page 129 for
more information.
3. Determine which of the following taillamp
assembly applies to your vehicle.
2. Remove the two
rear lamp assembly
screws near the
tailgate latch
strikerpost and pull
out the lamp
assembly.
4. Turn the bulb socket counterclockwise to
remove it from the taillamp assembly.
5. Pull the old bulb straight out from the socket.
6. Press a new bulb into the socket and turn
the socket clockwise into the taillamp
assembly.
7. Reinstall the taillamp assembly.
A. Stoplamp/Turn
Signal/Taillamp
B. Back-up Lamp
C. Stoplamp/Turn
Signal/Taillamp
555