Chevrolet Silverado 2007 Owner's Manual page 70

2. If the child restraint manufacturer recommends
that the top tether be attached, attach and
tighten the top tether to the top tether
anchor (loop), if your vehicle has one.
Refer to the child restraint instructions and
the following steps:
Example — Rear Driver's Side Position
70
Example — Rear Driver's Side Position
2.1. When using a child restraint with a top
tether in the rear driver side position:
A. Raise the head rest.
B. Route the top tether (B) between
the head rest posts, through the
loop (A), behind the inboard
head rest post, and under the
center shoulder belt (C).
C. Attach the top tether (B) to the top
tether anchor (loop) (D) at the
center rear seating position.