Subaru 2014 Legacy Owner's Manual page 56

Turning off Pre-Collision Throttle Management
Pressing and holding the Pre-Collision Braking System OFF switch for approximately 2 sec-
onds or longer will turn off the Pre-Collision Throttle Management System. When this func-
tion is turned off, the Pre-Collision Braking System OFF indicator light on the instrument
panel illuminates.
To turn the system back on, press and hold the Pre-Collision Braking System OFF switch
again for approximately 2 seconds or longer. When this function is turned on, the Pre-
Collision Braking System OFF indicator light turns off.
OFF
When Pre-Collision Throttle Management is turned off, the Pre-Collision
Braking System also turns off.
Even when Pre-Collision Throttle Management is turned off, if the ignition
switch is turned off and the engine is restarted, Pre-Collision Throttle
Management will be turned on. The default setting for Pre-Collision
Throttle Management when the vehicle is restarted is “"ON”".
S00377
NOTE
Pre-Collision Throttle Management
OFF
S00580
53