Gables/Roof Beams - Arrow CO108-A Owner's Manual

Step 11
D24
1
Lift and fasten a right and left
gable, under angle at corner, to the
door track and rear wall angle with
screws.
Hint: On the front gable, leave out 2
screws closest to center gable leg.
On the rear gable, use a bolt and nut
at the overlapping rear wall angle.
2
Fasten the single roof beam to
the outer gable leg as shown using
bolts.
Hint: The holes along the length of
the beam must be on the top surface.
Repeat Step 1 for the opposite side of
building.
3
Join the left and right gables
together with a gable brace using a
bolt in the second hole from the
bottom only . Do this step for both
front and rear gables.
Repeat Step 2 for the opposite side of
building.
STEP
3
24
● Parts Needed For ●

Gables/Roof Beams

6636 Gable Brace
● ● ● ● ● Left Gable Assemblies (2)
● ● ● ● ● Right Gable Assemblies (2)
● ● ● ● ● Single Roof Beam (2)
● ● ● ● ● 6636 Gable Brace (2)
STEP
1
Single Roof Beam Assembly
STEP
2
Gable