Front Channel/Door Jamb - Arrow CO108-A Owner's Manual

Step 9
D22
The door jambs reinforce the door
opening and provide an attractive
trim. Follow these steps for both
door jambs.
1
Fasten the front wall channels
in their positions between the end of
the side wall channel and the cor-
ner panel using screws. Do not put
a screw in the hole at the end be-
hind the door opening at this time.
2
Fasten a door jamb to the front
panel with two bolts, nuts and acorn
nuts, as shown.
3
Fasten the center of the door
jamb to the front wall panel and the
front wall channel with two screws.
4
Fasten the top of the door jamb to
the door track with two screws. Do
the same for the bottom into frame.
Repeat steps 2 through 4 for the
opposite door jamb.
22
● Parts Needed For ●

Front Channel/Door Jamb

9365
STEP
1
STEP
2
Acorn Nut
Hex Nut
9369
Acorn Nut
● ● ● ● ● 9369 Door Jamb (2)
● ● ● ● ● 9365 Front Wall Channel (2)
INSIDE OF
BUILDING
TOP VIEW
(2) bolts
Door Track
Bolt
TOP VIEW
Front Wall Channel
Screw
Screw
STEP
4
9369
Front Wall Channel
Cross-Section
Top View
Screw
STEP
3
TOP VIEW
Door Track
Screw