Roof Beam Assemblies - Arrow CO108-A Owner's Manual

Step 3
D16
The roof beams join the two gables
and support the roof panels. The main
roof beam is made up of four pieces
overlapped back to back at the cen-
ter. The left and right roof beam as-
semblies are made up of two pieces.
Hint: These pieces are force-fitted,
so you may have to press hard to join
them together.
1
Place the end of one roof beam
inside a second roof beam so that the
six holes in each piece align. Make
four sets of roof beams by repeating
this procedure. Do not insert bolts
yet.
2
Take two of the pressed-together
roof beams and join them as shown
to form the main roof beam assembly.
Hold the assembly together and fas-
ten with 14 bolts. Build only one
Doubled Beam Assembly.
3
Fasten the other two pressed-
together roof beams with eight bolts
to make the left and right roof beam
assemblies.
4
Double check the length of each
and set these pieces aside for later
use.
16
● Parts Needed For ●

Roof Beam Assemblies

10470
STEP
1
STEP
2
10470
STEP
3
Build two Single Beam Assemblies
● ● ● ● ● 10470 Roof Beam (8)
Roof Beam 91 7/8"
ASSEMBLED
END
VIEW
Build one Doubled Main Roof
Beam Assembly for Peak in Roof
10470
91 7/8"
233,4 cm
10470
233,4 cm
10470
10470
91 7/8"
233,4 cm