Table of Contents
Advertisement
Step 2
D15
The main frame pieces reinforce the
walls. These pieces will later be in-
stalled in the center and at the top
edge of the side walls and the rear
wall. Proceed as follows:
1
Overlap the rear wall channel
pieces as shown in the figure and
fasten the two pieces together with
one bolt in the center hole (three
holes will align).
2
Make two side wall channels by
overlapping the side wall channel
pieces as shown. Fasten each set
together with one bolt in the center
hole of each set.
3
Overlap the rear wall angle
pieces as shown in the figure and
fasten them together with one bolt in
the center hole.
4
Make two side wall angles by
overlapping the side wall angle
pieces as shown. Fasten each set
together with one bolt in the center
hole.
5
Double check the length of each
and set these pieces aside for later
use.
● Parts Needed For ●
Frame Assemblies
9917
9922
5986
8841
STEP
5
● ● ● ● ● 5986 Rear Wall Angle (2)
● ● ● ● ● 9917 Rear Wall Channel (2)
● ● ● ● ● 9922 Side Wall Channel (4)
● ● ● ● ● 8841 Side Wall Angle (4)
Rear Wall Channel
118 1/8"
Side Wall Channels
89 7/8"
STEP
STEP
2
1
5986
8841
STEP
STEP
4
3
Rear Wall Channel
118 1/8"
Side Wall Channels
89 7/8"
118 1/8"
Side Wall Angles
89 7/8"
300,0 cm
9917
228,3 cm
9922
Rear Wall Angle
118 1/8"
300,0 cm
Side Wall Angles
89 7/8"
228,3 cm
300,0 cm
228,3 cm
Rear Wall Angle
300,0 cm
228,3 cm
15
Hide quick links:
Advertisement
Table of Contents
