Table of Contents
Advertisement
To search for a specific record, refer to
Using database data in a Label Type mode
This function enables you to select the range of database fields to print.
Press a, and then select the Label Type mode as described in chapter 2.
1
Press g, then a. The message "CLEAR TEXT & PRINT DATABASE?"
2
appears.
Press n.
3
Press l or r until RECORD NO. is displayed, and then specify the desired
4
range of records.
Press l or r until FIELD NO. is displayed, and then specify the desired
5
range of record fields.
Press n (or p). START appears in the Print Option menu.
6
Press n (or p) to begin printing the labels using the specified range of
7
records.
If label text has been typed in, you will be asked to choose either TEXT PRINT or
DATA PRINT when
PRINT. If TEXT PRINT is selected, the special printing functions for printing
multiple copies of labels (refer to page 35), printing multiple copies with incremental
characters (refer to page 36), printing a range of text blocks (refer to page 37), or
printing the label text as a mirror image (refer to page 38) are available.
To specify settings for additional Print Option functions, instead of continuing with
7
step
, press
menu, and then press
Printing mirrored labels
page 35 and
While trying to print a large amount of data at one time, some outputted labels may be
blank. For example, when printing 50 records, the maximum number of characters
that can be printed at one time is limited to approximately 200.
g, then a
u
d
or
until CONTINUE is displayed in the Print Option
n
. (Refer to
Searching the database
is pressed. At this time, select DATA
Printing multiple copies of a label
on page 38.)
on page 70.
on
69
Advertisement
Table of Contents
