Table of Contents
Advertisement
3
Drag the transfer data to the folder you
created.
Drag the transfer data from All contents,
Layouts or another folder under Filter.
When transferring multiple sets of data, you
can move all the transfer data to the folder
you created.
4
Key Assign numbers are automatically
assigned to transferred data inside the folder
you made in the previous step.
To change a number, right click the data
name in the list view, then select the Key
Assign number.
Key Assign is necessary for transfer of data
other than message texts.
If you change the Key Assign number used
for data which has already been transferred
to the P-touch labeler, the data will be
overwritten. You can check the Key Assign
number used for data already transferred to
the P-touch labeler by backing up the data
Backing up label
as explained in
templates
on page 70.
You can click the data name for transfer
data and change to a new name. The
character limit is 15 words.
5
Select the data or folder you want to
transfer, then click
The transfer confirmation message is
displayed.
.
65
Advertisement
Table of Contents
