Chapter 1 - Welcome; Important Notes, Compatibility, Software Req's - RTI XP-3 Installation And Operation Manual

CHAPTER 1 | WELCOME
Thank you for using the XP-3 Remote Control Processor.
The XP-3 is designed to automate and enhance the operation of A/V,
security, lighting, HVAC, and countless other devices in a commercial
or residential environment. The XP-3 is packed with features including
a variety of control options, such as two-way RS-232, relays, Ethernet,
and routable IR. The processor also has a built-in 2.4 GHz ZigBee
transceiver for sophisticated bidirectional communication with compatible
RTI remote controls. The XP-3 can also be configured to support 433MHz
RF communication using additional RTI accessories and wireless remotes.
For complete control in any room, the XP-3 even allows powerful two-way
control with Ethernet enabled RTI in-wall controllers, and reliable one-way
control with compatible RTI in-wall products.
IMPORTANT NOTES
Please read these important notes about the XP-3:
The XP-3 should be placed in an area where it is around normal room
temperature (between 60°F to 90°F).
Avoid installing the XP-3 in a location where it can come in contact
with direct sunlight.
Do not let the XP-3 get wet. It should not be handled with wet hands
or placed in an area where it could get wet.
Do not subject the XP-3 to smoke, dust, or vibrations.
Only use the power supply that is specified for the XP-3. Using the
wrong type of power supply may result in damage.
Do not disassemble the unit. Service of the XP-3 should be performed
by authorized personnel only. Service of the XP-3 performed by
unauthorized personnel will invalidate its warranty.
SOFTWARE REQUIREMENTS
The recommended minimum system requirements needed to run the
Integration Designer
Windows XP
®
operating system.
software are as follows:
®
, Windows Vista , Windows 7
®
It's Under Control
or later version of Microsoft
®
®
RF
®
9