Brickcom NR-04A User Manual page 10

Using Setup Wizard Utility
If the NR-04A is added to a corporate network or a local area network where a
DHCP server is already presented, install the "Smart Device Search" utility
onto a computer that is connected to the network. This utility is available on
the provided CD. Once the utility has been installed, located the NR-04A with
the IP address that is assigned by the top-level DHCP server.
To begin, launch the "Setup Wizard" from the CD and proceed with the
installation.
Once the installation is completed, click "Finish" and launch the NVR Search
Utility.