Table of Contents
Advertisement
2.
Enter the person's name and at least one phone number.
3.
If you want to enter more information—for example, another phone number—press
[Key 1] (Options), select Add detail, and enter the additional information.
4.
Press [Key 2] (Done) to save the entry in the Contacts directory.
2.6 Sending a text message
1.
Press [Menu], and select Messaging.
2.
Press [Select] to select the first option, New Message.
3.
Press [Select] to select the short text message option (you can select Multimedia
message or E-mail if preferred).
The Text message window appears.
4.
Enter the recipient's phone number by either of these methods:
• In the To field, key in the phone number.
Or
• Press [Key 1] (Options), select Add recipient, select an entry in the Contacts directory, and
press [Key 1] (OK) to confirm your choice.
5.
In the Text message window, press [Down] once to go to the text field, and enter and
edit your message.
6.
Press [Call] to send the message.
2.7 Using profiles and changing ring tones
Profiles let you quickly change the way your phone notifies you of incoming calls or messages. Your
phone contains a number of predefined profiles—for example, General (the profile in use when you turn
on the phone for the first time), Silent, and Meeting. You can associate each profile with a different ring
tone, ring volume, and key tone; you can set the vibrating alert as on or off in each profile; and you can
change the name of all the profiles except the General profile.
To switch profiles:
•
Briefly press the [Power] key, and from the menu, select a profile.
To modify a profile:
1.
Press [Menu
2.
Select the profile that you want to modify.
3.
From the Options menu, select Personalise.
4.
Select the property that you want to change.
5.
Scroll through the options, and press [Select] to choose an option.
Note: When you select a ring tone, the TALKS announcement of the tone's name may stop the sounding
of the actual ring tone, since today's phones cannot always play more than one audio channel at once. In
this case, you may want to mute speech output by pressing [TALKS], [Clear], before navigating through
the list of ring tones. To have TALKS announce the ring tone's name, press [TALKS], [Up], which
interrupts the ring tone to make the announcement. To assign a ring tone to the selected profile, press
[Key 1] (Select). To return to the previously selected ring tone, press [Key 2] (Cancel). If speech is
muted, you should then press [TALKS], [Clear] again, to unmute speech afterwards.
], and select
Profiles.
9
Hide quick links:
Advertisement
Table of Contents
