Advanced Settings; Automation Settings - NUANCE Series 60 Phones User Manual

•
Speech (see section 4.2.14)
•
Volume (see section 4.2.7)
•
Speed (see section 4.2.8)
•
Spelling Speed (see section 4.2.9)
•
Pitch (see section 4.2.10)
•
Key Echo (see section 4.2.2)
•
Speak upper case (see section 4.2.3)
•
Use spelling alphabet (see section 4.2.5)
•
Speak punctuation (see section 4.2.6)
•
Read numbers as (see section 4.2.15)
•
Speech delay (S60 3
•
Volume factor (S60 3

3.3 Advanced settings

The settings that are displayed on the Advanced tab depend upon the TALKS&ZOOMS components
that you have purchased. The following settings appear for the TALKS screen-reader module:
•
Read function keys (see section 4.1.3)
•
Read list index (see section 4.2.17)
•
Read subtitles (see section 4.2.24)
•
Verbose descriptions (see section 4.2.18)
•
Mute on keylock (see section 4.2.19)
•
Cursor mode (see section 4.2.11)
•
T9 key echo (see section 4.2.3)
•
Echo passwords (see section 4.2.13)
•
Full list items (see section 4.2.23)
•
Progress update (see section 4.2.25)
•
Echo function keys (see section 4.2.27)
•
Read text status (see section 4.2.28)
The following settings are always available on the Advanced tab:
•
TALKS key timeout (see section 4.2.20)
•
TALKS mode timeout (see section 4.2.21)
•
Choose TALKS key (see section 4.2.26)

3.4 Automation settings

The settings on the Automation tab enable you to customize the readout of caller ID and incoming text
messages. The settings are as follows:
•
Caller ID: If you want TALKS to read out the caller ID of incoming calls, activate the readout by
setting the amount of time for TALKS to wait before muting the ring and reading out the caller
ID. You can select 1, 3, 5, 10, 15, or 20 seconds.
Edition only; see section 4.2.29)
rd
Edition only; see section 4.2.30)
rd
16