Hitachi TAW-270NH2A Operation Manual page 15

Setting the operation mode and time for the 1st setting
4
Press the button.
The day of the week is now set and the operation mode starts to blink.
5
Press the
ON : Standard operation
EC : ECO mode operation
OF : OFF
– – : No timer operation
6
Press the button.
The operating mode is set and the time starts to blink.
7
Press the
(The time can be set in 10-minute increments.)
8
Press the button.
The 1st setting has now been made and the 2nd
operation mode is displayed.
Setting the operation mode and time for the 2nd setting
9
Press the
ON : Standard operation
EC : ECO mode operation
OF : OFF
– – : No timer operation
10
Press the button.
The operation mode is now set and the time starts to blink.
11
Press the
(The time can be set in 10-minute increments.)
12
Press the button.
The 2nd setting is now set and the
After about 10 seconds, the indicator will alternately display current
water temperature and the time.
buttons to set the operation mode.
buttons to change the time.
buttons to set the operation mode.
buttons to change the time.
indicator goes on.
– 15 –