Restoring Factory Default Settings; About Upgrading; Upgrade Exclusions; Troubleshooting - One for All 6-Device Universal Remote User Manual

2. Enter 9 9 3 and then press VOL +
once. The LED will blink four
times.
3. Volume will again be
independently controlled
according to its default states for
all programmed devices.
RESTORING FACTORY
DEFAULT SETTINGS
The One For All 6L Universal Remote
Control (URC-6020 B00) includes a
Setup Code Reset program. You can
use it to restore all your programmed
codes to factory settings and delete all
custom programming.
IMPORTANT: Executing this program
erases all code settings and all
custom settings including, Macros,
Learned Keys, Reassigned Device
Keys, Keymoved Keys, Favorite
Channels, and all device settings.
1. On the remote control, press and
hold SET until the LED (red
light) blinks twice, then release
SET.
2. Enter 9 8 0. The LED will blink
four times.
3. Your remote is now ready for
programming.

ABOUT UPGRADING

The One For All 6L Universal Remote
Control (URC-6020 B00) has the
largest infrared code library available.
However, if you purchase a brand new
home entertainment or home
automation device, it may not
respond to the codes stored in the
remote control's memory.
If this happens, please contact our
Customer Support department (see
"Troubleshooting" on page 13) to
upgrade the remote control. The
Customer Support representative will
search our entire database for a code
that matches your device and instruct
you how to enter it into your One For
All 6L Universal Remote Control
(URC-6020 B00).
If the code for your home
entertainment or home automation
device is not in our database, we will
need to "capture" the code for that
device from its original remote
control. A new code would then be
created and entered into your One For
All 6L Universal Remote Control
(URC-6020 B00). If necessary, the
Customer Support representative can
instruct you how to begin the capture
procedure.
NOTE: One For All reserves the right to
replace a returned remote control with
a new one of equal or superior
functionality.
U E
PGRADE XCLUSIONS
• Home entertainment or home
automation devices controlled
by radio frequency (RF/UHF),
wired, or ultrasonic remote
controls. Only devices controlled
by infrared remote controls are
covered.
• Home entertainment or home
automation devices not
controlled by remote controls.
• Broken or defective product.
• Products that operate over 100
kHz.
• Infrared keyboards and infrared
pointing devices (such as mouse
substitutes).
• All products for sale and/or use
outside the continental United
States, Hawaii, Alaska, or
Canada.

TROUBLESHOOTING

PROBLEM:
SOLUTION:
PROBLEM:
SOLUTION:
PROBLEM:

Restoring Factory Default Settings

O ' M
WNER S ANUAL
LED (red light)
does not blink
when you press a
key.
Replace batteries
with two new AAA
alkaline batteries.
LED (red light)
blinks five times
after you press a
key.
Replace batteries
with two new AAA
alkaline batteries.
LED blinks when
you press a key,
but home
entertainment
device does not
respond.
13