Operation; Assembly; Handle - Husqvarna LE389 Owner's Manual

KNOW YOUR EDGER/TRIMMER
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
EDGER/TRIMMER. Compare the illustrations with your EDGER/TRIMMER to familiarize
yourself with the location of various controls and adjustments. Save this manual for future
reference.
Throttle
Control
Starter

Handle

Adjustable Rear
Wheel
Adjustable Front
Wheel
Throttle Control – Used to control the engine
speed.
Primer Button – Injects fuel directly into the
carburetor manifold for faster starts.
Starter Handle – The engine on this Edger/
Trimmer is equipped with an easy pull recoil
starter.
Clutch Lever – Used to start and stop the
blade and control the depth of cut.
Blade Guard – Used to prevent stones or
other material from being thrown at the opera-
tor.
FAST
Slow
Fast
Clutch Lever
Control Rod
Oil Fill Cap/
Fuel
Dipstick
Cap
Blade
Guard
Stop
VIEW OF ENGINE NEAR AIR FILTER
FIG. 1-OP
Index Lever – Permits adjustment from the
edging (vertical) position to trimming (horizon-
tal) position. To change position, pull the index
lever and rotate the quill assembly to the
desired angle or position.
Adjustable Rear Wheel – Right rear wheel is
adjustable to level Edger/Trimmer when edg-
ing along a curb(curb-hopping).
Adjustable Front Wheel – Front wheel is
adjustable from side-to-side for balance. Also,
can be adjusted down for curb-hopping .
6

OPERATION

PRIMER
Primer Button
Primer Button
VIEW OF BLADE AREA
Blade
Index Lever