Sharp PN-70TB3 Operation Manual page 20

Touch Panel / Touch Pen Preparations
nAdding active pens (pairing)
Perform active pen pairing for one pen at a time.
1. Click the touch pen utility icon (
2. Click [Touch pen settings].
3. Select a line in the touch pen settings screen that does
not have an active pen registered, and click [Registration].
4. Simultaneously hold down function button 1 and
function button 3 of the active pen being paired for at
least 5 seconds (approx.).
5. When the battery indicator blinks, release function
button 1 and function button 3.
A message appears after completion of pairing.
6. Click [OK].
TIPS
• When multiple active pens are used, touch positions
and pen information (color, thickness, etc.) may become
interchanged, and lines may break.
- When touched simultaneously.
- When pens are moved near each other.
- When batteries are low.
- When other wireless equipment is operating nearby.
• Do not press the pen tip on other than the display. This may
cause malfunctioning.
• An active pen cannot be registered in multiple touch pen
adapters at once.
• You can affix the supplied ID labels to the PN-ZL02 to
distinguish the active pens.
20
E
nActive pen actions
) on the taskbar.
Functions can be assigned to the function buttons. For details,
see the Touch Pen Utility Operation Manual.
The factory default settings are as follows.
• Function button 1 : Right mouse click
• Function button 2 : PageDown
• Function button 3 : PageUP
When the function button is pressed, the battery indicator
illuminates.
If the battery indicator does not illuminate, check if the battery
is depleted.
nActive pen settings
Active pen settings are configured using the Touch Pen Utility.
For details on the settings and how to use the utility, see the
Touch Pen Utility Operation Manual.
Function button 1
Pen tip
Battery indicator
TIPS
• Use function buttons near the front of the screen. If too far
away, operation will not be possible.
• Press function buttons slowly and firmly. If pressed too
quickly, the action may not be recognized.
• The line may break if the active pen battery is low or there
is other wireless equipment in operation nearby.
• If the pen tip becomes worn or damaged, replace it.
Function button 3
Function button 2