Connecting The Power Cord; Binding Cables - Sharp PN-70TB3 Operation Manual

Caution
• Use only the power cord supplied with the monitor.
1. Turn off the main power switch.
2. Plug the power cord (supplied) into the AC input terminal.
3. Plug the power cord (supplied) into the AC power outlet.
*2
*1
PN-70TB3 only
*1
Cable clamp
(insertion type)
Cable clamp
attachment
14
E

Connecting the Power Cord

Binding Cables

*1
*1
*2
*2 *2
Cable
For power
outlet
3
Power cord (Supplied)
The cables connected to the terminals on the rear of the
monitor can be fastened with the cable clamp.
*2
*2
Cable
Cable clamp
attachment
Cable clamp
Main power switch
1
2
AC input terminal