Download Print this page

Operation Instructions; Maintenance - Health O Meter 2842KL Operation Manual

Low profile veterinary scale
Hide thumbs Also See for 2842KL:

Advertisement

Available languages

Available languages

OPERATION INSTRUCTIONS

1.
Press the ON/OFF button to turn the scale on.
2.
Wait until "0.0" appears on the digital display.
3.
If you choose to use a mat, blanket or other accessory on top of the built-in rubber,
make sure that the edges of the accessory are on the scale and are not touching the
surface on which the scale is positioned. Press the ZERO button to cancel the weight of
the accessory that is on the scale.
4.
Place an animal on the scale. The display will blink "
is determined.
5.
If you wish to reweigh without to remove and to place an animal on the scale again,
press the REWEIGH button.
6.
Remove the animal from the scale. The digital display should continue to read the
animal's weight until REWEIGH or ZERO button is pressed.
NOTE: After 2 minutes of inactivity, the scale will turn itself off to conserve power. To restart
the scale press the ON/OFF button.

MAINTENANCE

GENERAL
This section provides instructions for maintenance, cleaning, troubleshooting and operator
replaceable parts for the Low Profile Veterinary Scale model 2842KL. Maintenance
operations other than those described in this section should be performed by qualified service
personnel.
MAINTENANCE
Before first use and after periods of non-use, check the scale for proper operation and
function. If the scale does not operate correctly, refer to qualified service personnel.
1.
Check overall appearance of the total scale for any obvious damage, wear and tear.
2.
Inspect AC adapter for cord cracking or fraying or for broken or bent prongs.
CLEANING
Proper care and cleaning is essential to ensure a long life of accurate and effective operation.
Disconnect the scale from the AC power source.
1.
Clean all external surfaces with a clean damp cloth or tissue. Mild soap and water
solution may be used. Dry with a clean soft cloth.
2.
Do not immerse the scale base or display assembly into cleaning or other liquid
solution.
3.
Do not use Isopropyl Alcohol or other solutions to clean the display surface.
------
" until the weight of the animal
------
6

Hide quick links:

Advertisement

loading