NComputing L230 User Manual page 37


Delay until shutdown (seconds): Displays the default amount of time after a
shutdown command is issued on the host until the shutdown occurs. After the
shutdown command is issued on the host, the shutdown timer starts. Then, a
window pops up on each access device that tells the users they must logoff since
the host is shutting down. Each user must save their work. Also, a window pops
up on the host that enables the administrator to abort the shutdown timer and
start the shutdown immediately, or cancel the shutdown. When the shutdown
timer expires, the shutdown occurs.

Disable Send Broadcast Message: Displays whether or not the administrator
has disabled broadcast messages. See the description of the "Sessions" tree
item for more information about how broadcast messages work.

Disable Console in Context Menu: Displays whether or not the administrator
has disabled the Console Icon from showing up in the Windows system tray of a
user's virtual desktop session.

Prevent access of the USB-storage devices to the attached terminal:
Displays whether or not the administrator has globally prevented access to USB
devices on access devices.

Remote View/Control allowed: Displays whether or not the administrator has
configured the vSpace software to allow administrators to remotely view user and
control user sessions.

Clean up disconnected sessions not in use: Displays whether the vSpace
software automatically looks for disconnected sessions that are not in use and
logs them out after a defined period of time. If this feature is turned off (set to
"No" or "0"), when any access device drops its connection, the connection
remains active on the host. When the user reconnects, their disconnected
session is reconnected to their new session and all their open files and
applications are available again. Also, in this case, the only way to end a
disconnected session is for an administrator to stop the session from the console
software. If this feature is turned on (set to any whole number up to 999), the
same behavior applies, but when a session is disconnected, a timer starts. If the
user reconnects before the timer is up, their disconnected session is reconnected
to their new session and all their open files and applications are available again.
If the timer runs out and the session is still disconnected, the vSpace software
will end the session by itself. This makes sure that disconnected sessions do not
reserve resources for an indefinite period. By default, this is set to "5."

Support WTSAPI32 Interface: Displays whether or not the vSpace software has
turned on support for the WTSAPI32 interface. (This feature is currently
disabled.)

Disable background-bitmaps under Windows XP: Displays whether or not the
user is able to set their own background bitmap for their Windows desktop.

Do not display last user name: Displays whether or not the vSpace software
displays the last user name that logged on using a particular access device. This
is sometimes enabled as a security measure.

UTMA/UTSA USB port support: Displays whether the administrator has set the
vSpace software to allow using the USB port on L230 access devices.

Administrator Password: Displays whether an administrator password is set.
36
L230/L130 User Manual