Using The Access Device; Configure The Access Device; The Access Device Screen - NComputing L230 User Manual

Using the access device

Configure the Access Device

The access device screen

The available connection list shows the vSpace hosts to which the device can connect.
Select a host from the list and click on the "Connect" button to start.
The "Refresh" button refreshes the available connection list.
The Options Menu
The "Options" button brings up a menu where you can view and change the access
device's settings.
Within the "Options" screen, the "Reset" button resets the access device
The "Info" button brings up a window to view the following information about the access
device:

Version: the version of firmware running on the access device

Build: The build number of the firmware running on the access device

Date: The date of the firmware running on the access device

Device Model: The model number of the access device

Loaded Schema Version: The schema version running on the access device

IP Address: The IP address the access device is configured to use

Gateway: The IP gateway the access device is configured to use

MAC Address: The MAC address of the access device

Serial Number: The serial number of the access device

Alias: The alias of the access device, defined using the vSpace admin console
26
L230/L130 User Manual