Safety Precautions Thank you for purchasing this product. Never expose this unit, amplifier, and P l e a s e r e a d t h r o u g h t h e s e o p e r a t i n g speakers to moisture or water for preventing instructions so you will know how to operate electric sparks or fires.
Features DVD-R/RW compatibility Button Operation Explanations It is possible to playback DVD-R/RW discs Touch panel key operation recorded with the video format and Video It is possible to operate this unit by using Recording format. touch panel key. Some frequent operations WMA and MP3 compatibility 1) Move cursor It is possible to playback WMA and MP3 files.
Panel Controls Press PWR button to turn on the unit. 1. - Microphone 5. - Rotate to adjust volume level. 2. - Power on - Press and hold it to enter setting - Mute mode. - When on, long press to power off. 6.
Remote Controls 1. - Select the following sources: Remote control operating range >Radio The remote control can operate within a >Disc (when disc inserted) distance of 3~5m. >Card (when SD/MMC card inserted) >USB (when USB connected) >AV1 (rear AV in) Remote sensor >AV2 (front AV in) >Blue-tooth...
Page 7
Remote Controls (continued) Replacing the lithium battery of remote control unit When the range of the operation of the card remote control becomes short or no functions while operating, replace the battery with a new lithium battery. Make sure the battery polarity replacement is correct.
Basic Operations Turn on/off the power When parking brake applied 1. Press [PWR] button to turn on the unit. 1. If 'PRK SW' cable is connected to hand The unit goes back to the last status after brake switch, the video display of the TFT power on.
USB/SD/MMC Card Operation Using SD/MMC Card USB Notes 1. Loading SD/MMC card USB functions (flash memory type) MP3 music Insert the SD/MMC card into the slot. Close play the panel, the unit will read the file of the 1. USB flash memory 2 in 1 support card automatically.
Disc Operation Insert a disc Disc Playback Insert a disc into the slot, and the unit will 1. When disc inserted, display shows “READ”. change to disc mode automatically. For MP3 or disc with mixed files, reading time may exceed 1 minute. 2.
Page 11
Disc Operation (continued) Repeat - The sound will be muted. - Display “PAUSE” in the TV screen. During playback, press [ REPT ] or [ Press [ ] again to continue playback. repeatedly. T o r e s u m e n o r m a l p l a y , r e p e a t t h e - RPT icon will appear on the display.
Page 12
Disc Operation (continued) DVD Playback Menu For DVD and File disc, select title and chapter number. While playback touch the center of the screen: For VCD and CD, select track number. - Press [ ] to play, or move the cursor to select “PLAY”...
Page 13
Disc Operation (continued) CD/MP3/MP4/PHOTO Menu PHOTO Intro Menu While playback touch the center of the screen: While intro photos, touch the center of the screen: Hero.mp3 Long night.mp3 Leave me alone When I’m gone Touch to access desired function. 1. Display source menu 1.
Tuner Operation RDS Basics Radio Menu RDS service availability varies with areas. Please understand if RDS service is not available in you area, the following service is RADIO not available. AF Mode AF (Alternative Frequency): When the radio signal strength is poor, enabling the AF function will allow the unit to automatically search another station with the same PI (program identification) as the current station...
Tuner Operation Bluetooth Operation (continued) TA SEEK/TA ALARM Note: For your safety, avoid talking on the phone as Touch [ ] button on the source menu to much as possible while driving. enter the unit system setup menu, touch [Radio] to enter radio setting menu, then Bluetooth is a wireless transmission way select TA Seek or TA Alarm.
Page 16
Bluetooth Operation (continued) phones may instruct you to select connect or 10. Dial disconnect, please select connecting. 11. Page up After pairing successfully, the Bluetooth icon 12. Page down 13. Phone book lights up. Touch and hold button to 14. Received calls disconnect.
TV Operation Other Mode Select TV mode AV mode External peripheral devices with RCA audio Press SRC button repeatedly or select TV at and video outputs can be connected with the source menu to switch to TV mode. unit. For more details, please refer to < Electrical Touch the center of the screen to display the Connections Overall Diagram >.
System Setup Audio/Video Setting You have 2 methods to enter audio/video setting menu. Pair Method 1: Touch SEL on the TFT. Method 2: Press the SEL button on the Auto C onnect remote control. Auto Answer Reset OTHER 1. Display source menu 2.
Page 19
System Setup (continued) KEY PAD Subw Volume: Password: Set KEY PAD 13800138000 When the subwoofer on, touch [ ] / [ ] to Touch [Set] to open keypad, enter rating 13800138000 adjust subwoofer volume. password by the number buttons. Touch to erase previous number.
Page 20
System Setup (continued) Other Setting AF: On, Off Touch [On] or [Off] to select alternative frequency on or off. SWC (Steering Wheel Control) refer to <Basic Operations>. TA: On, Off T o u c h [ O n ] o r [ O f f ] t o s e l e c t t r a f f i c TS: Adjust announcement on or off.
Device Connections Notes of connection • If there is no ACC available, please connect ACC lead to the power supply with a switch. • This unit is designed to be used in a vehicle with a 12-volt battery and negative •...
Page 22
Device Connections (continued) Parking Brake Cable Connections Reverse Driving Cable Connections Steering Wheel Control Cable Connections Key A: Connect to steering wheel control cable Key B (standby) Key A Key B...
Page 23
Device Connections (continued) Electronic Connections Radio Antenna in TV Antenna in SUB.W (Brown) AUX 1 IN-R (Red) PARKING (Green) - AUX 1 IN-L (White) CAMERA (Pink) + FRONT AUDIO OUT-R (Red) SWC (Steering Wheel Control) FRONT AUDIO OUT-L (White) CAMERA IN (Yellow) REAR AUDIO OUT-R (Red) REAR AUDIO OUT-L (White) VIDEO 1 IN(Yellow)
Installation Installation Guide 1. If relevant, remove any other audio system from the car. 2. Perform the required electrical connections: - If necessary, connect the hand brake wire to your hand brake contact in order to activate the video display when playing a DVD (when the car is parked). - Connect the wire that activates the reversing camera to the reversing sensor or to a reversing light.
Troubleshooting The following checklist can help you solve the problems which you may encounter when using the unit. Before consulting it, check the connections and follow the instructions in the user manual. Problem Possible cause Solution General Car ignition is not on. Turn your car key in the ignition.
Specifications General 6.2 Inch TFT LCD Power supply 12V DC (11V-16V) Display resolution (dot) 800RGB (H) x 480(V) Test voltage 14.4V, Active area (mm) 137.52(H) x 77.232 negative ground Maximum power output 45Wx4 channels Screen size (inch) 6.2 (Diagonal) Continuous power output 25Wx4 channels (4 Dot pitch (mm) 0.1719(H) x 0.1609...
Need help?
Do you have a question about the AVM-56270BT and is the answer not in the manual?
Questions and answers