TYAN S2692 User Manual page 57

Quick Boot Mode
This BIOS feature allows you to decrease the time it takes to boot up the computer
by shortening or skipping certain standard booting procedures.
If enabled, the BIOS will shorten the booting process by skipping some tests and
shortening others. In addition, it will also perform the following to further speed up
the booting process:
Spin up the hard disks as soon as power is supplied (or as soon as possible)
Initialize only critical parts of the chipset
Read memory size from the SPD (Serial Presence Detect) chip on the memory
modules
Eliminate logo delays
If disabled, the BIOS will run the whole gamut of boot-up tests.
It is recommended that you disable this feature when you boot up a new computer
for the first time or whenever you install a new piece of hardware. This allows the
BIOS to run full diagnostic tests to detect any problems that may slip past Quick
Boot's abbreviated testing scheme.
After a few error-free test runs, you should enable this feature for much faster
booting.
Options: Enabled / Disabled
3.6.1 Boot Device Priority
Use this screen to select options for the Boot Device Priority. Use the up and down
arrow (/) keys to select an item. Use the Plus and Minus (+/-) keys to change
the value of the selected option.
Main
1. Legacy Floppy Drives
2. IDE 0: Maxtor 6Y120P0-(PM)
3. IDE 1: Toshiba DVD-ROM SD-M1712-(
4.
5.
6.
7.
8.
Legacy Network Card
↑↓
F1 Help
← →
Esc Exit
1/2/3/4/5/6/7/8
These settings can be customized depending on your preference.
PhoenixBIOS Setup Utility
Advanced
Boot Device Priority
Select Item -/+
Select Menu Enter
http://www.tyan.com
Security Boot
Change Values
 Sub-Menu
Select
57
Exit
Item Specific Help
Keys used to view or
configure devices:
Up and Down arrows
select a device.
<+> and <-> moves the
device up or down.
<f> and <r> specifies the
device fixed or
removable.
<x> exclude or include
the device to boot.
<Shift + 1> enables or
disables a device.
<1 - 4> Loads default
boot sequence.
F9 Setup Defaults
F10 Previous Values