Security - TYAN S2692 User Manual

3.5 Security

These settings allow you to configure the security options for your system.
Main
Supervisor Password Is:
User Password Is:
Set Setup Password
Set User Password
Password on boot:
Write on Flexible Disks:
BIOS Write Protect:
Cabinet Monitoring:
F1 Help
← →
Esc Exit
The system displays the current supervisor and user passwords.
Set Setup Password
This option allows the supervisor to set the supervisor password to restrict access
to the BIOS settings.
Set User Password
This option allows the user to set the user password.
Password on boot
When enabled, the system will ask for a password at every boot. The system will
continue booting only if the correct password is entered. If the wrong password is
entered three times, the system will automatically shut down.
Options: Disabled / Enabled
Write on Flexible Disks
[Unlocked]: Data can be written to floppy disk.
[Locked]: No data can be written to floppy disk.
Options: Locked / Unlocked
BIOS Write Protect
When set to enabled, the BIOS Flash Memory will be write protected.
Options: Disabled / Enabled
Cabinet Monitoring
When set to enabled, the system's housing is monitored.
Options: Disabled / Enabled
PhoenixBIOS Setup Utility
Advanced
↑↓
Select Item
Select Menu
http://www.tyan.com
Security
Clear
Clear
[Enter]
[Enter]
[Disabled]
[Unlocked]
[Disabled]
[Disabled]
-/+ Change Values
 Sub-Menu
Enter Select
55
Boot Exit
Item Specific Help
Supervisor Password
controls the access to
the setup utility.
F9 Setup Defaults
F10 Previous Values