Explanation Of Symbols - Husqvarna 16 Operator's Manual

These symbols are on the machine and in the operator's manual.
N
R
Reverse Neutral
Oil pressure Cutting height
Hydrostatic free wheel
Noise emission to surroundings in accordance
with the directive of the European Community.
The machine's emission is indicated in the
chapter TECHNICAL DATA and on the decal.
Never use the machine if persons, especially
children, or animals, are in the vicinity.
4
– English

EXPLANATION OF SYMBOLS

Study them carefully so that you know what they mean.
Read the operator's manual
Fast Slow
Backwards
Use eye and hearing protection
Warning!
Rotating blades.
Never carry passengers on the
machine or equipment.
Starting instructions
Read the instructions
Check the engine's oil level
Check the hydrostat's oil level
Lift up the cutting unit
Put the hydrostat pedals in the
neutral position
Brake
If the engine is cold use the choke
Start the engine
Release the parking brake before
driving
Engine off Battery
Forwards
Parking brake
Warning! Never drive across a
Risk that the
machine can tip over
Keep hands and feet away
from under the hood when
the engine is running.
Choke Fuel
Ignition
Brake Warning
CE conformity
slope marking
Drive very slowly
without the cutting unit.
Speed limiter pedal forwards
Neutral
Speed limiter pedal reverse
Switch off the engine and take off
the ignition cable before repairs or
maintenance