Husqvarna 2003-06 Operator's Manual page 20

• In order for the loop system to work well, the wires
in passages where the Auto Mower is to run
through must not lie too close together.
A passage should be at least 2 metres wide so the
Auto Mower can find it and make its way through it.
The minimum spacing between the wires in a pas-
sage is 130 cm.
The transition between a large area and a passage
should be, if possible, designed like a "funnel", with
rounded corners, to make it easier for the Auto Mower
to enter the passage.
C. Placing the charging station
1. Place the charging station according to your plan.
2. Connect the low voltage cable to the charging sta-
tion.
Only Husqvarna original cable and transformer
may be used.
3. Connect the low voltage cable to the transformer.
The connectors may be a slightly difficult to con-
nect, as they are moisture-proof.
4. Connect the transformer's power cord to a 230V
wall socket. It is preferable to use an earth-fault
breaker as recommended.
INSTALLATION
Secondary
area
2m
Main area
3012-232
3012-263
3012-262
21
English-