Husqvarna 2003-06 Operator's Manual page 10

The STOP button on the top of Auto Mower is mainly
used to stop the mower when it's running. When the
STOP button is pressed a cover opens, behind which
there is a control panel. The STOP button remains
depressed until the cover is closed again. This acts as
start inhibitor.
The control panel on the top of the Auto Mower is
where you manage all the mower settings. The main
switch is also located on the control panel. Open the
control panel cover by pressing down the STOP button.
When the main switch is turned ON for the first time, a
start-up sequence begins which includes: selection of
the language, time format, date format and the four
digit PIN code as well as the setting of the time and
date, see page 25.
The Auto Mower can enter a sleep mode to save
power. The display on the control panel is then com-
pletely dimmed.
The sleep mode is activated 25 minutes after the
STOP button has been pressed and then not reset to
the operating mode. Auto Mower is then activated by
switching the main switch off and on.
The sleep mode can also be activated in the event of a
fault occurring during mowing or charging and which is
not rectified within 25 minutes. The Auto Mower is then
activated by pressing the STOP button.
PRESENTATION
3012-247
3012-283
3012-297
11
English-