Mitsubishi Electric Mr.Slim MUZ-A09NA Service Manual page 70

OPERATING PROCEDURE
4. Removing the defrost thermistor (MUZ), dis-
charge temperature thermistor, outdoor heat
exchanger temperature thermistor and ambient
temperature thermistor
(1) Remove the top panel, cabinet and service panel.
(Refer to 1.)
(2) Remove the back panel. (Refer to 1.)
(3) Remove the inverter assembly. (Refer to 2.)
(4) Pull out the defrost thermistor from its holder. (Photo 6)
(MUZ)
(5) Pull out the discharge temperature thermistor from its
holder. (Photo 5)
(6) Pull out the outdoor heat exchanger temperature ther-
mistor from its holder. (Photo 6)
(7) Pull out the ambient temperature thermistor from its
holder. (Photo 6)
5. Removing outdoor fan motor
(1) Remove the top panel, cabinet and service panel.
(Refer to 1.)
(2) Remove the back panel. (Refer to 1.)
(3) Remove the inverter assembly. (Refer to 2.)
(4) Remove the propeller.
(5) Remove the screws fixing the fan motor.
(6) Remove the fan motor.
Photo 5
Discharge temperature thermistor
Photo 6
Outdoor heat
exchanger
temperature
thermistor
Ambient
temperature
thermistor
Defrost
thermistor
(For MUZ)
Photo 7
Screws of the outdoor fan motor
Propeller
70
PHOTOS