Mounting The Lower V-Belt Guard; Mounting The Spool Holder - Pfaff 1181 Instruction Manual

8

Mounting the lower V-belt guard

.01.04
Fig. 8 - 04
8

Mounting the spool holder

.01.05
Fig. 8 - 05
This step is eliminated for integrated sewing motors.
2
1
Table top mounting and circuit diagrams
(see Chapter 11)
Installation and commissioning
Align belt-guard 1 in such a way that both
●
the motor pulley and the V-belt run freely.
Tighten screws 2.
●
A quick motor is shown in
Fig. 8-04. If another motor is
used, carry out this step accor-
ding to the instructions in the
motor instruction manual.
2
Mount the spool holder as shown in
●
Fig. 8-05.
Insert the spool holder into the hole in
●
the table top and fasten it with the nuts
enclosed.
21