8
Mounting the lower V-belt guard
.01.04
Fig. 8 - 04
8.
Mounting tilt-over safeguard
01.05
Fig. 8 - 06
Mounting and commissioning the machine
Fig. 8 - 04 shows a Quick motor. If another motor is used, proceed as described
in the motor's instruction manual.
2
1
Align belt-guard 7 in such a way that both
the motor pulley and the V-belt run freely.
Tighten screws 8.
8
7
8
Screw-mount tilt-over safeguard 1
included in the accessories with screw 2.
Do not operate the machine
without tilt-over safeguard 1!
Danger of crushing between
upper part and table top!
8 - 3