Raymarine SmartController User Manual page 5

81243_1.fm Page 5 Tuesday, December 7, 2004 10:06 AM
Battery power and signal strength
The battery power (5 levels) are indicated on the left
hand side of the display. Your SmartController will
sound an alarm when battery power is running low.
Wireless signal strength is shown in a similarly on the
right hand side of the display.
+
_
Charging the SmartController
Before using the SmartController for the first
time, you will need to charge the unit.
To charge the SmartController, simply place it
into the cradle, pull open the rubber cover on
the base and connect the charging cable.
CAUTION:
Do not use any other cable to charge
the unit.
The battery power indicator will flash during
charging. The recommended charge time is
approximately five hours. Once fully charged
the battery indicator will stop flashing.
The SmartController can also be charged
whenever you wish without affecting
performance.
User Guide
Y
5