Declaration Of Conformity; Emc Guidelines; Handbook Information - Raymarine SmartController User Manual

81243_1.fm Page 44 Tuesday, December 7, 2004 10:06 AM

Declaration of Conformity

Hereby Raymarine UK Ltd, declare that these SRD products
(SmartController and Basestation) are in compliance with the essential
requirements and other relevant provisions of the Directive 1999/5/EC
The original Declaration of Conformity certificate may be viewed on the
relevant product page at www.raymarine.com

EMC Guidelines

All Raymarine equipment and accessories are designed to the best industry
standards for use in the recreational marine environment. Their design and
manufacture conforms to the appropriate Electromagnetic Compatibility
(EMC) standards, but correct installation is required to ensure that
performance is not compromised.
Connections to other equipment
If your Raymarine equipment is to be connected to other equipment using a
cable not supplied by Raymarine, a suppression ferrite MUST always be
attached to the cable near to the Raymarine unit.

Handbook Information

To the best of our knowledge, the information in this handbook was correct
when it went to press. However, Raymarine cannot accept liability for any
inaccuracies or omissions it may contain. In addition, our policy of
continuous product improvement may change specifications without
notice. As a result, Raymarine cannot accept liability for any differences
between the product and the handbook.
®
SeaTalk is a Registered Trademark of Raymarine
All other trademarks used in this document are acknowledged.
© Copyright Raymarine UK Limited 2004
44 User Guide