To Register A Handset - Raymarine SmartController User Manual

81243_1.fm Page 37 Tuesday, December 7, 2004 10:06 AM
Hardware and Software version numbers
Use this option to display the current hardware revision and the software
version numbers for the SmartController. At VERSION, press the SELECT
key to display the information.
Self test
Press SELECT to start the unit test sequence and then follow the on-screen
instructions. This will test the display, buzzer and button functions.
Diagnostics
Press PILOT to display the the status of the wireless link.
Handset Registration
Raymarine wireless systems require each wireless controller to be
"registered" to a basestation. This registration process is to prevent
unauthorised control of your boat by another wireless user.
Note: There may be instances where you want to move your controller to
another boat and use it with another system. In this case, you will need to
de-register from the current system and register with the new system. You
can do this using the REGISTRATION function.
Note: For best results always perform registration and de-registration with
the handset close to the basestation.

To register a handset

HANDSET
At REGISTRATION, press SELECT.
NOT
If the SmartController is not registered,
REGISTERED
then the display will read HANDSET NOT
REGISTERED. Press REG to start the
registration process.
CANCEL REG
User Guide 37