Table of Contents
Advertisement
Notes:
a) The alarm will be activated automatically once the alarm time
has been altered.
b) The alarm will alert for 1 minute. Press any key to stop the alarm.
CHRONOMETER
It can be used as a stopwatch as well as a countdown timer.
Use as a stopwatch:
1. Press ST/ SP to start or stop the stopwatch in clock-chronometer display.
2. Press and hold SET for two seconds to reset the stopwatch.
Use as a countdown timer:
1. Press and hold SET for two seconds to set the time for the
countdown timer in clock-chronometer display.
2. Press SET to toggle between the hour, minute and second setting.
3. Press +/- to increase or decrease the values.
4. Press SET to confirm the setting and toggle to next field and
then quit the setting mode.
5. Press ST/SP to start or stop the chronometer in clock-chronometer
display after setting.
6. Press and hold SET for two seconds to reset the timer.
Refer to Fig. 3d to set the countdown timer.
SET
+
-
SET
Set hour
Notes:
a) This chronometer works independently with the chronometer
in sailing timer mode.
b) This chronometer can run simultaneously with the sailing timer.
c) If the chronometer is used as a timer, after reset it will go back
to set time in the timer mode. The chronometer could be used as
a stopwatch unless the time display shows 00:00:00.
d) After the countdown timer count to 00:00:00, it will start count
up as a stopwatch automatically.
10
+
-
+
SET
Set minute
Set second
Fig. 3d
Fig.3d
SET
-
Advertisement
Table of Contents
