Fully-Automatic Operation - Honda Insight 2000 Owner's Manual

Main Menu
Climate Control System

Fully-automatic Operation

Auto Button
To put the Automatic Climate
Control in fully-automatic mode,
press the AUTO button and set the
desired temperature by turning the
temperature control dial. You will
see AUTO in the system's display.
The light above the
also shows you which mode,
Recirculation or Fresh Air, is
selected.
When the system is in fully
automatic mode, the auto idle stop
function will not be activated.
The system automatically selects the
proper mix of conditioned and/or
heated air that will, as quickly as
possible, raise or lower the interior
temperature from its current level to
the set temperature.
Comfort and Convenience Features
Table of Contents
MODE BUTTON
button
When you set the temperature to its
lower limit (60°F/18°C) or its upper
limit (90°F/32°C), the system runs
at full cooling or heating only. It does
not regulate the interior temperature.
When the temperature is set
between the lower and upper limits,
the system regulates the interior
temperature to the set value.
FAN SPEED BUTTON
ECON BUTTON
OFF BUTTON
TEMPERATURE
CONTROL DIAL
AUTO BUTTON
In cold weather, the fan will not
come on automatically until the car
has been driven for a short time and
the heater starts to develop warm air.